Trucks & acessories
-
Are trucks and risers come in a 1 unit?
http://www.skateone.com/store/detail/s_TTDD2500/c_197/
http://www.skateone.com/store/detail/risers/s_TSCML1S/c_285/
What is this?
http://www.skateone.com/store/category/accessories/bearing+parts/c_230/
Is that a tape or adhesive tape?
http://www.skateone.com/store/detail/stickers/s_AZARAT/c_27/
Size to choose?
http://www.skateone.com/store/detail/hardware/s_TMPML/c_31/ -
"What is this?
http://www.skateone.com/store/category/accessories/bearing+parts/c_230/"
Bearing parts. The retainers are the inner workings of the bearing, the "slots" are what holds the ball bearings. Basically for rebuilding bearings.
"Size to choose?
http://www.skateone.com/store/detail/hardware/s_TMPML/c_31/ "
Depends on your setup. Do you use risers? If so, how thick? That will determine how long of a bolt you need, as it needs to go through the deck, truck, and risers....if any. -
yeah for hardware if you are rocking 1/8 inch riser go with 1 1/4 inch. If no risers then 1 inch hardware will work. Use 1 1/2 bolts for 1/4 inch risers.
Is that a tape or adhesive tape?
http://www.skateone.com/store/detail/stickers/s_AZARAT/c_27/
It's a roll of sticker tape. it's main use is for lining ramps or skateparks. -
ok, thanks for the comments
but .. risers $ 2.00 x2 & trucks $ 21.95 x1?
This discussion has been closed.
All Discussions Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!
