Mini Logo truck bushings

SkaterRick · September 2017

I just tried my ML 8.75" trucks on a new deck today and with the kingpin nut almost all the way out (meaning that I didn't have the top of the kingpin receding into the washer) they were still too stiff. I only weigh about 145 lbs. Does anybody remove the nuts, or replace with other bushings?

SkaterRick · September 2017

Sorry, I meant to say remove one of the washers. Not the kingpin nut. You wouldn't skate very far without it.

SK8ER · September 2017

I use Bones Bushings in my mini logo trucks and they work great.

SkaterRick · September 2017

Thanks, SK8ER. Medium or soft?

SK8ER · September 2017

I'm 200lbs so I use hard.

klayts · October 2017

@SkaterRick I have removed the washers from the bushings in Thunder trucks to get more turn out of them. I'm sure it would work on mini logo trucks, too.

SkaterRick · October 2017

I've skated a couple of times with these backed out more (thought not today because it's freakin' WET), and I may have to try this. Next option is to buy softer bushings. I assume the stock ones would be "medium".

TheFarter2.0 · October 2017

Indy's with Hard Bones Bushings can handle TheFarter2.0 and should be able to handle all you weak wind breakers!

SkaterRick · October 2017

How much does TheFarter2.0 weigh?

TheFarter2.0 · October 2017

TheFarter2.0's weight is classified, top secret information.

Mini Logo truck bushings

Comments

Howdy, Stranger!

Categories

In this Discussion