Customer Reviews

Great products jus too high shipping cost Review by Thanoukanh

Rating

I always use bearing spacers. I bought some Spitfire bearings and there were no bearing spacers. I google to see who would have them and skateone showed up.
Very fast shipping and high quality packaging. Only problem is that the shipping was $6 which was too high for something this small. So I order 4 packs so that I wouldn't waste the shipping cost. Just make sure you order a lot of stuff because of so high shipping. (Posted on 4/12/2021)

Essential equipment Review by michael

Rating

These are great quality and essential for efficient and proper wheel operation. (Posted on 11/6/2020)

Imporve the life span of your bearings Review by Benjamin

Rating

I hate skating without spacers. Whenever I don't use spacers, my bearings wear out to fast, and no amount of cleaning could ever make them roll smoothly again. These come with every set of bones swiss. Use them and replace them when needed. (Posted on 6/19/2020)

Bearing spacers Review by Philip

Rating

As always, I look for Powell/Bones for most of my technical equipment and parts for my boards.

These make such a huge difference on wheel performance.

They will be going into my V3 stf 54mm bones (Posted on 6/12/2020)

Bearing Spacers are a CRITICAL component! Review by Jesse W.

Rating

I picked up a used board with Bones SPF wheels and, to my pleasant surprise, Bones Super Six bearings. However, whoever owned it before did not use bearing spacers, so I picked up a set here. Perfect fit and now I can tighten my truck bolts down a little more snuggly and get a more effective roll.

Many people forgo spacers as an unnecessary item (like truck washers)...I used to myself. But all of these components are designed to work in harmony with your bearings to help them spin efficiently while minimizing drag caused by the inner race rolling around the axle instead of staying stationary so the bearing can spin. Truck washers lock against the outer edge of the inner race. Bearing spacers connect the two inner races to one another. And the inner truck washer also locks into the edge of the inner race. This locks all pieces together with the inner race to ensure that when you roll, you are spinning your bearings around the inner race, not spinning your inner race around your axle. To me, it's folly to buy ultra-high-quality bearings like Bones Swiss and then not use spacers. Use them! They allow you to snug up your assembly for less board rattle and, I believe, help reduce the likelihood of ripping out the inner core of your wheels if you slide a lot. The only set of wheels I ever ripped the inner core out of did not have spacers. Never again!

BTW...props to Powell for exceptional bearing and urethane quality. I'm an old skater coming back and the wheels and bearings are better than ever! Keep up the great work! (Posted on 5/5/2020)

Perfect fit Review by David

Rating

Worked with my bones spf wheels great! (Posted on 10/21/2019)

Excellent product! Review by Patrick A. WillsCulby

Rating

Wow impressed and price spectacular! Triple P Loyal! (Posted on 9/14/2019)

Great! Review by Brett Sanderson

Rating

Just what I needed @ the best price! (Posted on 8/21/2019)

Sales Review by Sam

Rating

Worked perfect for my G-Bones.. Great prices and fast delivery..
(Posted on 7/1/2019)

Good fit and finish Review by Colin

Rating

Fits well between my bones wheels. (Posted on 10/26/2018)