I recently setup an all mini logo deck and it rules! It's a natty 8.5 small bomb, 8.38 raw trucks, 56mm 90a wheels, and grip and hardware. I have always wanted an all mini logo deck for street play and so far I am loving it.
Posting pics on here takes forever, but I might when I have the time.
I currently have the MiniLogo 1/10 riser and it is fine for street play and I don't ride my trucks loose. If I ever take it to a bowl I would probably throw on a 1/8 or 1/4 riser.
I wish Mini Logo would make an 8.75" or 9" deck so I could use the mini logo 8.75 trucks.
I use trucks a quater inch larger on pops boards, only a fraction of axle sticks past the board and wheels are pretty much bang on the width. Having said that skate one pops boards taper at each end, what is the front and back truck widths of your mini logo Board? I would guess wider at the front than the back.
$88 for a quality complete is pretty good. Seems like some bones bushings will help any set of trucks. Back to ML stuff - anybody know if the ML AWOL wheels are the same as the PP ATFs? Same sizes, shape, and durometer, so I've been wondering if the AWOLs are the PP ATF formulas but made in China and put in the ML product line, so they cost a bit less. I have two sets of PP ATFs and I've been happy with them. If I ever need a new set of 78a wheels, I may just go with the AWOLs.
The ML AWOL wheels are made in the USA and are the same size, duro, as the PP ATF. Most ML wheels are still made in the USA, only the 53mm 90a hybrids are made in China. I ride the ML 56mm 90a hybrids and they are made in the USA and are treaded, unlike the oval dragons, and they slide way better than the oval dragons.
Comments
I currently have the MiniLogo 1/10 riser and it is fine for street play and I don't ride my trucks loose. If I ever take it to a bowl I would probably throw on a 1/8 or 1/4 riser.
I wish Mini Logo would make an 8.75" or 9" deck so I could use the mini logo 8.75 trucks.